Bathroom remodel with Schluter Kerdi-Board waterproofing, shown from demolition to finished tiled shower

Blog

How to Make a Schluter Warranty Claim: A Homeowner's Guide

Author
MBTile
Published
November 2026
Read time
6 min read

Follow these steps to file your Schluter-Systems warranty claim as a homeowner in Canada. These steps come straight from Schluter's published warranty documents, and Morina Brothers Inc., a Schluter-certified installer, can help you through each one.

How to File a Schluter Warranty Claim

  1. Stop and document. Take clear photos and notes of the problem and the date you noticed it. Don't tear anything out before Schluter inspects, unless you need to stop active water damage. If you must, photograph everything first and keep the removed materials.

  2. Call Morina Brothers Inc. We'll help you figure out what went wrong, document it properly and put together everything Schluter needs to see. As a Schluter-certified installer, we can help show your system was built to Schluter's installation handbook, which is one of the first things Schluter checks when reviewing a claim.

  3. Notify Schluter in writing within 30 days. Schluter requires written notice within 30 days of discovering the defect. If you miss it, the warranty "shall have no legal effect." A phone call is a good start, but follow it up in writing and keep a dated copy.

  4. Gather your documents. Your notice must include:

    • Date and proof of purchase of the Schluter products
    • Name and address of every installer
    • All invoices from the original installation

    Also include photos, the product names and, for DITRA-HEAT floors, the completed heating cable tests log (required for heated floor claims).

  5. Send your claim to Schluter Canada. Use registered mail or courier so you can prove the date.

    Schluter Systems (Canada) Inc.
    Attn: Warranty Claims Dept.
    21100 chemin Ste-Marie
    Ste-Anne-de-Bellevue, QC H9X 3Y8
    Phone: 1-800-667-8746
  6. Allow the inspection. Schluter can inspect the installation before approving a claim. Let your installer know the date so they can explain how the system was built.

  7. Get your resolution. If the defect is covered under a system or lifetime warranty, Schluter will either repair or replace the failed portion of the tile assembly (including tile and setting materials), or pay up to the original per-square-foot installation cost. Schluter chooses which.

    Installed by Morina Brothers? We can send you a copy of your original installation invoice, which Schluter uses to work out repair or reimbursement costs. Installed by another company? Contact us and we can give you an estimate of the repair cost to support your claim. Without invoices, Schluter may pay the average cost of a comparable installation instead.

    Disputes on Canadian claims go to binding arbitration in Quebec.

Sample Claim Letter

Copy and adapt this:

[Date]

Schluter Systems (Canada) Inc.
Attn: Warranty Claims Dept.
21100 chemin Ste-Marie
Ste-Anne-de-Bellevue, QC H9X 3Y8

Re: Warranty Claim, [Product or system, e.g. Schluter-Shower System]
Property address: [Your address]

To the Warranty Claims Department,

I am writing to give notice of an alleged defect in a Schluter installation at
the property above. I discovered the issue on [date].

Description of the problem:
[What you see, where it is, when it started]

Installation details:
- Products installed: [list]
- Date of installation: [date]
- Installer(s): [Company name, address] (and any other installers)

Enclosed:
- Proof and date of purchase
- All invoices for the original installation
- Photos of the issue
- [DITRA-HEAT only: completed heating cable tests log]
- [Registration confirmation, if any]

I am available to arrange an inspection. Please contact me at
[phone] or [email].

Sincerely,
[Name]

Which Schluter Warranty Covers You?

Warranty Term
Schluter-DITRA-HEAT System 15 years
Schluter-Shower System 10 years
Lifetime Thin-Set System Lifetime
DITRA / DITRA-XL uncoupling membranes 10 years
KERDI waterproofing membranes 10 years
KERDI-BOARD panels 10 years
Floor drains (KERDI-DRAIN, KERDI-LINE) 10 years
Floor, wall, stair and movement joint profiles 5 years
DITRA-HEAT thermostats 3 years
Thin-set mortars, primers, KERDI-FIX 1 year

System and lifetime warranties cover the whole tile assembly. Product warranties cover the product itself. Other Schluter products carry 1 to 10 year warranties, listed in Schluter's warranty summary. Coverage applies only when products are installed to Schluter's installation handbooks.

Not sure what was installed? Ask your installer. We keep records of the Schluter products used on our jobs.

Lifetime Thin-Set System Warranty

You may qualify for lifetime coverage if:

  • A qualifying system was used: DITRA or DITRA-XL, the Schluter-Shower System, KERDI or KERDI-DS, or DITRA-HEAT or DITRA-HEAT-DUO
  • It was set with Schluter thin-set mortar (SET, ALL-SET or FAST-SET)
  • It was registered with Schluter within 90 days

"Lifetime" means as long as the original installation is unchanged and the original owner owns the home. Full terms apply to single-family homes; condos and multi-family buildings have different terms. Heating cables and thermostats are not included.

DITRA-HEAT Thermostat Warranty

Thermostats are not part of the 15-year DITRA-HEAT System warranty. They have their own 3-year warranty from the date of purchase. Schluter repairs or replaces the thermostat, but the cost to disconnect and reinstall it is not covered.

DITRA-HEAT Floor Not Working? Check This First

Before you file a claim, rule out the simple stuff:

  1. Check the breaker for the floor heating circuit.
  2. Check the thermostat settings. Make sure it's on, set above the current floor temperature, and not held off by a schedule or away mode.
  3. Look for an error code on the screen and look it up in your thermostat's user manual.
  4. Just installed? Schluter's Wi-Fi thermostat can take 3 to 5 days of continuous heating to learn your floor, so it may overshoot or undershoot at first.

Still not heating? Don't swap the thermostat yourself, since the cause is often the heating cable or floor sensor. Leave the wiring to a licensed electrician, find your heating cable tests log, and call us. Your 30-day notice window starts when you discover the problem.

What Can Void Your Schluter Warranty

  • Improper installation: not following Schluter's installation handbooks and technical data sheets
  • Wrong materials for the application
  • Non-Schluter components mixed into a Shower System or DITRA-HEAT System
  • Unauthorized sellers, including unauthorized websites
  • Abuse, misuse or lack of maintenance
  • Poor substrate or structural failure
  • Exterior applications, unless approved in writing by Schluter
  • DITRA-HEAT only: a missing cable nameplate, altered components, or no heating cable tests log

Normal wear and tear, natural shade variation and indirect damages are also excluded. A certified install done to Schluter's handbook is what keeps your warranty valid.

Register Your Installation Right After Install

  • DITRA-HEAT floors: The installer must complete all four heating cable tests at installation. If Test 3 is missing, coverage drops to 10 years. If Test 1, 2 or 4 is missing, the system warranty does not apply. Keep the original log and register online or mail the form from the cable box.
  • Lifetime Thin-Set System: Register online within 90 days. Schluter's documents reference both purchase and installation dates, so register as soon as the job is done.
Morina Brothers tile setter holding a multimeter while performing a conductor resistance test on a DITRA-HEAT heating cable
A Morina Brothers tile setter performing a conductor resistance test on a DITRA-HEAT heating cable. The readings go in the heating cable tests log that Schluter asks for with a heated floor claim.

Schluter warranties cover the original owner only and cannot be transferred unless Schluter agrees in writing.

Frequently Asked Questions

Do I file the claim, or does my installer?
The warranty is between you and Schluter, so you make the claim. Your installer can help identify the products, provide invoices and support the inspection.

I bought Schluter products online. Am I covered?
Only if the seller is authorized by Schluter. To check, call 1-800-667-8746 or email [email protected].

Official Schluter Warranty Resources

Need help with a Schluter claim? Contact Morina Brothers Inc. and we'll walk you through it.

This guide is for general information and is based on Schluter-Systems' published warranty documents. Warranty terms can change and vary by product and installation date. Always refer to the official warranty document for your product.

Need an experienced Calgary tile installer?

We work with porcelain, ceramic, mosaic, granite - and we'll come out for free to assess your project.